Lahti Precision Tpl400 Manual Jun 2026
Only in an emergency. You cannot perform a master reset or recalibrate the dancers without the step-by-step instructions. Running without the manual for more than a week is a risk to the mechanical integrity of the unwind brake.
Press and hold the key until the display prompts for a passcode. lahti precision tpl400 manual
Used to scroll through configuration menus and modify numerical values. 4. Configuration and Parameter Setup Only in an emergency
| Specification | Detail | | :--- | :--- | | | 0.05 | | Internal Resolution | 130,000 (13 x 10⁴) | | Drift | +/- 2 ppm / °C @ 2.5 mV/V | | Conversion Speed | Selectable: 10 or 80 readings / second | | Input Voltage | 230 VAC / 115 VAC or 9-32 VDC, 10 VA | | Operating Temperature | -10 °C to +50 °C | | Load Cell Interface | 5 V (max 160 mA), 4- or 6-wire connection | | Analog Output | Galvanically isolated 4 – 20 mA (max 1 kΩ) and 0 – 10 V (max 2 mA) | | Set Points | 2 relays, 240 VAC, 5A; with latching and inversion options | | Enclosure Protection | IP65 (varies by enclosure type) | Press and hold the key until the display
Route all cables through the integrated liquid-tight compression bushings to maintain the IP65 environmental rating. Wiring and Electrical Interfaces
Proper installation eliminates environmental interference and guarantees long-term measurement accuracy. Physical Mounting
Even with the manual, users make mistakes. Avoid these:
