To keep your Pacific Fitness Del Mar running flawlessly for years to come, follow these simple upkeep habits:
Insert the selector pin to test the movement of the stack. Phase 3: Arms and Press Station
Keep bolts "finger-tight" at this stage to allow for alignment adjustments later. 2. Weight Stack & Guide Rods Guide Rods: pacific fitness del mar home gym assembly manual
Attach the swinging arm pieces (butterfly/bench press) using the provided rods. Tighten the bolts evenly on both sides to ensure an even gap and smooth movement. 4. Cable Routing (The "Del Mar" Layout)
Perform a few light repetitions on each station (Leg Extension, Lat Pulldown, Chest Press) to ensure the cables move freely without binding. National Gym Supply To keep your Pacific Fitness Del Mar running
Secure the weight stack base frame in the rear. Phase 2: Weight Stack Installation
This is the most complex part and the source of frequent errors (like the common complaint of the cable coming up short). Weight Stack & Guide Rods Guide Rods: Attach
: Starts at the lat pull-down bar attachment point, runs over the top front pulley, travels backward along the top beam, drops down through the floating pulley block, and terminates at the top plate of the weight stack.
You will generally require a set of adjustable wrenches, a socket set (specifically 1/2-inch and 9/16-inch), and a 3/16-inch hex key for set screws. Step-by-Step Assembly Overview
Do you need assistance with a (e.g., the leg extension or the chest press)?
Go back through the entire machine and fully tighten all nuts and bolts. Ensure nylon locknuts are fully engaged.