This refers to the UEFI Shell specification version that your firmware implements. It is a standard version number, not a random code. While the UEFI Forum has published many shell specifications (2.0, 2.1, 2.2, etc.), version 2.60 is relatively recent and common in modern firmware. When you boot into the shell, the ver command can show this exact information.

You can use the command line to force the computer to launch Windows if the boot files are intact but misconfigured. Type map -r and press to list all available drives. Look for your main drive, usually labeled as fs0: or fs1: . Type fs0: (or the correct number) and press Enter . Type ls or dir to see the folder structure.

Restart the computer, remove the USB drive, and allow the system to boot normally. To help narrow down the exact cause, let me know:

If the BIOS does not list your hard drive anywhere in the boot menu, the computer cannot see the drive physically.

The EFI Shell acts as a lightweight operating system built directly into your motherboard. It provides a DOS-like command-line interface (CLI) for interacting with system firmware before a primary OS like Windows or Linux loads.

Can you see your listed anywhere inside your BIOS settings?

If these steps don't work, you may need to use a (USB) to perform a "Startup Repair" from the Official Microsoft Support page.

Displays the files and directories inside the current folder. ls -b (paged view) cd Changes the current working directory path. cd EFI\Microsoft\Boot cls Clears the command line screen of text. cls reset

The message "" appearing on your screen indicates that your computer's motherboard has failed to find a bootable operating system (like Windows) and has instead loaded a built-in command-line environment for diagnostics. This is common on devices from manufacturers like LattePanda and Acer . Common Causes for This Error

Move or your primary SSD to Position 1 . Check your Boot Mode (CSM/Legacy vs. UEFI).

Did this screen appear or after a system update/hardware change ?

The EFI Shell version 2.60 / 2.512 is an incredibly powerful diagnostic environment built to assist with low-level recovery. However, when it appears unexpectedly, it acts as a warning system indicating that your motherboard cannot find your operating system. By verifying your BIOS boot priority, ensuring your storage hardware is physically connected, and verifying your EFI system partitions, you can resolve the boot loop and safely restore access to your operating system.

By 2021, UEFI 2.60+ was standard in most enterprise and consumer devices, often utilized during troubleshooting boot issues caused by system updates.

The motherboard is prioritizing the internal EFI Shell over your hard drive or SSD.