Gpsuinet | Setup

For the gateway to intercept satellite positioning strings, the local serial connection must match the communication parameters of the receiver module. If using specialized software or a terminal interface, configure your hardware ports according to these standard parameters: Recommended Value 9600 or 115200 (depending on the receiver module) Data Bits 8 Parity None Stop Bits 1 Data Format NMEA Active Strings

Open your target system console (such as the GpsGate Tracking Engine ) and navigate directly to the administrative workspace.

Add inbound/outbound traffic rules for your specific port in your router or network firewall configuration. gpsuinet setup

Locate unnecessary string protocols (such as GSV or GSA ) that your tracking platform does not require.

After completing your GPSUINet setup, run these final tests: For the gateway to intercept satellite positioning strings,

: Insert the SIM card into a standard smartphone first. Navigate to the security settings and disable the SIM PIN lock completely. The tracker cannot bypass a PIN request on startup.

(Note: Port 7700 is the standard network port for generic Chinese tracking protocols. Consult your specific hardware manual if the port differs.) Step 4: Set the Data Reporting Interval Locate unnecessary string protocols (such as GSV or

Before beginning the physical installation or configuration, ensure you have the following: