If you want VPN clients to access the internet through the MikroTik (full tunnel), add a masquerade rule for the VPN pool.
Click and OK . Repeat this process for additional users. Via Command Line (CLI):
Under -> IPsec -> Active Peers , you will see the active hardware-encrypted cryptographic security associations (SAs). Common Troubleshooting Scenarios mikrotik l2tp server setup full
Drag these rules to the top of your firewall list to ensure they take precedence over any drop rules. CLI Commands:
Notes: ipsec-secret is the PSK clients must use. This setting auto-enables PPP service for L2TP. If you want VPN clients to access the
192.168.89.1 (The router's identity inside the VPN tunnel) Remote Address: Select l2tp-vpn-pool from the dropdown. In the Protocols tab: Use Encryption: Change to yes or required . In the Limits tab (Optional):
Change DNS Server if necessary (e.g., 8.8.8.8 or your internal DNS). Click and OK . Part 3: Enable L2TP Server Now, we activate the L2TP service on the router. Go to PPP > Interface . Click L2TP Server . Enabled : Check this box. Default Profile : Select l2tp-profile . Authentication : Check mschap2 (recommended). Via Command Line (CLI): Under -> IPsec ->
Ultimate Guide: Layer 2 Tunneling Protocol (L2TP) Server Setup on MikroTik RouterOS