Check if the menu setting for trigger mode (e.g., P-02 ) is set with too high of a delay value.
Blinks during the warm-up phase; stays solid green when the device operates normally on AC power.
Proper installation is crucial for the effective operation of the JKD-512COM. jkd-512com user manual
If monitoring (heavier than air): Mount 0.3 to 1 meter above the floor.
network and try moving the alarm closer to the router during pairing 1.2.1. Check if the menu setting for trigger mode (e
Plug the power cord into a standard AC wall outlet.
: 3-color LED (Green, Red, Yellow) and an 80 dB audible siren. Operating Instructions jkd-512com user manual
Inspect the sensor or external switch wiring connected to the port.