Br 3021 Shock Manual Upd -

Slowly lower the floor jack to decompress the suspension safely.

Adjust the regulator to the desired PSI within the factory threshold and fill slowly. br 3021 shock manual

If you need help with a specific part of your setup, tell me: What are you installing these on? Slowly lower the floor jack to decompress the

The BR 3021 relies on a high-pressure nitrogen charge to prevent fluid cavitation. , as moisture and oxygen will corrode internal parts and risk explosion under extreme heat. The BR 3021 relies on a high-pressure nitrogen

Compression damping controls how the shock resists collapsing when hitting a bump.

: Inspect the tightness of all mounting hardware. Check for bushing deformation. Tighten loose components to spec or replace worn rubber components. Issue 3: Harsh Ride or Lack of Suspension Compliance

| Specification | Typical Value | |---------------|----------------| | Type | Air or Coil-over (check your model) | | Mounting | Trunnion or Eyelet (common on enduro/DH bikes) | | Adjustment | Rebound, Compression (low/high speed) | | Air Pressure Range | 50–300 PSI (air version only) |