Jie Rui Bt-5908 Manual Pdf [patched] Online

Verify your red wire connection. It must be attached to a wire that reads 12V when the car key is turned on. Ensure your black ground wire is attached to unpainted metal.

Press the "AUX", "Mode", or "CD" button on your radio. If your radio does not have an active AUX option, you may need to get the AUX function coded/activated via your car's OBD2 diagnostic port (common on BMW and VW models).

While the covers the basics, experienced users have discovered advanced optimizations. Here are three bonus tips to enhance your experience.

Use plastic panel tools to gently pry away the trim surrounding your car stereo. Unbolt the radio securing screws.

Turn on your audio system or switch your car key to the position. Jie Rui Bt-5908 Manual Pdf

: Find the matching multi-pin port on the back of your factory radio.

Check the black ground wire connection. A loose ground creates engine whine or static noise. The device drains my car battery overnight.

: Connects directly to the factory radio's auxiliary or CD changer port (e.g., 6-pin, 8-pin, 10-pin, or 12-pin variants depending on the car model). Voltage Range

The Complete Jie Rui BT-5908 Bluetooth Adapter Manual and Setup Guide Verify your red wire connection

Plastic trim removal tools (to prevent scratching the dashboard)

Switch your vehicle's car stereo source mode to , CD , or CDC (CD Changer) using the "Source" or "Mode" button on the front panel.

A voice prompt or beep from your car speakers will confirm a successful connection. Playing Audio

Secure the to a clean, unpainted metal section of the car chassis or splice it into the factory stereo's ground wire. Press the "AUX", "Mode", or "CD" button on your radio

The Jie Rui BT-5908 is a popular aftermarket Bluetooth audio adapter designed for vehicles. It connects to the factory auxiliary (AUX) input of an OEM car radio. This allows wireless music streaming from smartphones and tablets.

Secure the Bluetooth module module inside the dashboard cavity using zip ties or double-sided foam tape to prevent it from rattling while driving. Push the radio back into place and snap the trim panels shut. Troubleshooting & FAQ 1. The Bluetooth network name is not appearing on my phone. The module is not receiving power.

For drivers who prefer to keep a digital manual handy on their phones or tablets, saving this document as a PDF ensures offline access when working on your car.

: Insert the BT-5908 male harness directly into that OEM port. Connect the Power Wires :

Bluetooth 5.0 (backward compatible with 4.0/3.0/2.0) Operating Voltage: 5V–12V DC Operational Current: 25mA Frequency Response: 20Hz–20KHz Signal-to-Noise Ratio (SNR): >95dB Output Impedance: 600 ohm Effective Range: 10 metres (approx. 33 feet) Package Contents