Baofeng Uv-10r Programming | Software

: Often provided on a mini-CD with the radio or available on the Baofeng download page

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

When programming your Baofeng UV-10R, always ensure you comply with your local telecommunications regulatory body (such as the FCC in the United States or Ofcom in the United Kingdom).

After editing channels:

Baofeng UV-10R can be programmed using two primary methods: professional third-party software like or specialized (Customer Programming Software) provided by manufacturers. Recommended Programming Software CHIRP (Free/Open Source)

Enter your desired frequencies, duplex offsets, tones (CTCSS/DCS), and names.

Immediately save this file ( File > Save As ) as a backup, just in case you need to restore your radio's original settings. Phase B: Programming Channels Click on the Memories tab. Baofeng Uv-10r Programming Software

If you prefer commercial, dedicated software built specifically for the UV-10R, offers the most reliable solution. Their flagship product, the "BAO-10R Programming Software," is tailored for the Baofeng UV-10R and the UV-10RP radios. RT Systems is a well-established name in amateur radio, known for creating software that works flawlessly without requiring you to guess which generic driver to use.

| Problem | Solution | |---------|----------| | Software shows Chinese characters | Go to → English (top menu). | | “Frequency out of range” | UV-10R is locked to ham bands unless unlocked via special key sequence (research locally legal limits). | | Channels disappear after upload | You overwrote memory with blank data. Always read from radio first, then edit, then write. | | Radio freezes after programming | Perform a factory reset: Menu → 40 → Reset → All. Then re-upload. | | Cannot hear audio on programmed channels | Check Tone Mode – if set to TSQL with wrong tone, squelch stays closed. |

Open the official UV-10R software > Settings or Connection. Select the exact COM port you saw in Device Manager. Set Baud Rate to 9600. : Often provided on a mini-CD with the

Baofeng frequently updates the internal firmware of the UV-10R. If CHIRP rejects the UV-5R profile, try selecting BF-F8HP or UV-82 , as the UV-10R shares architectures with multiple legacy models. Legal and Safety Reminders

The 2-pin connector can be incredibly stiff on brand-new UV-10R units. Push the connector firmly until it is completely flush with the radio housing.

Transmission on amateur radio bands (Ham radio), GMRS, or business frequencies requires appropriate licensing. Can’t copy the link right now

If your UV-10R refuses to connect to the software, here are the most common fixes: