Requires ffmpeg or avconv, however one of these comes pre-installed on most machines. install sync-dl via pypi using pip:

pip install sync-dl

Created to avoid having music deleted but still have the convenience of browsing, adding and reordering new music using remote services such as youtube.

The application does not store any of its metadata in songs, metadata is stored next to them in a .metadata file, the music files are managed through number ing, allowing them to be played alphanumerically using any playback service (such as VLC)

For more information see https://github.com/PrinceOfPuppers/sync-dl

sync-dl [options] COMMAND [options] PLAYLIST

sync-dl has the several subcommands, run sync-dl -h to see them all and sync-dl [COMMAND] -h to get info on a particular one. As an example, here is the new command which creates new playlists from a youtube [URL]:

sync-dl new [URL] [PLAYLIST]

The playlist will be put it in directory [PLAYLIST], which is relative to the current working directory unless you specify your music directory using:

sync-dl config -l [PATH]

Where [PATH] is where you wish to store all your playlists in, ie) ~/Music.

The main feature of sync-dl:

sync-dl sync -s PLAYLIST

Adds new music from remote playlist to local playlist, also takes ordering of remote playlist without deleting songs no longer available in remote playlist.

Songs that are no longer available in remote, will remain after the song they are currently after in the local playlist to maintain playlist flow.

Includes tools managing large playlists, For example:

sync-dl edit --move-range [I1] [I2] [NI] [PLAYLIST]

which allows a user to move a block of songs From [I1] to [I2] to after song [N1].

Moving large blocks of songs on youtube requires dragging each song individually up/down a the page as it trys to dynamically load the hunders of songs you're scrolling past, which you would have to do every time you would want to add new music to somewhere other than the end of the playlist... (ask me how I know :^P)

Firmware Reset Samsung M2020w !exclusive! Free | Must Try

Drag the .hd firmware file and .

This process often involves third-party software and can void your manufacturer's warranty. How it Works :

If you are experiencing connection issues or want to revert settings to default, use these built-in methods: Soft Reset (Clear Settings): Ensure the printer is in Press and hold the Stop/Cancel button for approximately 10–15 seconds until the status LED flashes rapidly.

Hold both buttons for 3–5 seconds until the status LEDs light up, then release them. The printer is now in . 2. Flash the Firmware firmware reset samsung m2020w free

Drag and drop the .hd file onto the usbprns2.exe file (this is the executable that sends the data to the printer).

Scroll to Network Reset (or “Reset Network”) → Press OK .

Before downloading files from the internet, it is critical to understand how Samsung M2020W firmware works. Drag the

Use this for fixing print quality issues or clearing a “Jam” error that won’t go away.

⚠️ : Interrupting a firmware update can permanently damage your printer’s mainboard. Never turn off the power or disconnect the USB cable during the process. Make sure you use the correct firmware file for the M2020W—loading firmware meant for another model will almost certainly brick the device.

Put the printer into : Press and hold the WPS button , then press and hold the Power button . Release both when the LED turns solid orange/green. Hold both buttons for 3–5 seconds until the

until the LED blinks. This clears stored Wi-Fi credentials and allows you to reconnect as if it were a new setup. SyncThru Web Service Reset: Access the SyncThru Web Service by entering the printer's IP address into a web browser. Log in with the default ID and password Navigate to Network Settings to reset network parameters. 2. "Chipless" Firmware Reset (Toner Hack)

Since the M2020W lacks a complex display screen for "Tech Mode" menus, a full factory reset is best done through the web interface:

If your printer is locked via software, installing the official Samsung/HP Smart Organizing Monitor or Easy Printer Manager allows you to look at the exact error code. In some older driver versions, you can toggle settings to "Ignore Toner Low" messages, allowing the machine to continue printing until the pages physically fade. The Legal and Reliable Alternative: Chipless Cartridges

For more information see https://github.com/PrinceOfPuppers/sync-dl-ytapi

sync-dl ytapi --push order [PLAYLIST]

sync-dl has a submodule which uses the youtube api the preform the reverse of Smart Sync called Push Order.

sync-dl will prompt you to install the submodule if you use any of its options ie) --push-order. you must also sign in with google (so sync-dl can edit the order of your playlist).

sync-dl ytapi transfer [OPTIONS] [SRC_PLAYLIST] [DEST_PLAYLIST]

Transfers songs between SRC_PLAYLIST and DEST_PLAYLIST on both local and remote, moving a single song using -t SI DI or a range of songs -r S1 S2 DI

sync-dl ytapi transfer [OPTIONS] [SRC_PLAYLIST] [DEST_PLAYLIST]

To see all options as well as a more indepth description use the command:

sync-dl ytapi transfer -h

To build for development run:

git clone https://github.com/PrinceOfPuppers/sync-dl.git
cd sync-dl    
pip install -e .

This will build and install sync-dl in place, allowing you to work on the code without having to reinstall after changes

python test.py [options] TEST_PLAYLIST_URL

Will run all unit and integration tests, for the integration tests it will use the playlist TEST_PLAYLIST_URL