Nitocote Nt402 Msds !!better!! < DELUXE × 2025 >

: It is classified as toxic to aquatic life with long-lasting effects. Safety Features

For further technical details or to request a quote, you can visit the Fosroc Nitocote NT402 product page or consult the full Nitocote NT402 Safety Data Sheet for complete regulatory information.

Dispose of waste in accordance with local hazardous waste regulations.

: Typically contains epoxy resins and 1,4-butanediol diglycidyl ether. nitocote nt402 msds

The MSDS typically classifies Nitocote NT402 as a (depending on regional regulations). Key hazards include:

Vapor or spray mist may cause respiratory irritation. 2. Handling Precautions

Two-part chemical system (Part A: Base, Part B: Hardener) : It is classified as toxic to aquatic

Irrigate immediately with copious water for several minutes and seek urgent medical attention. Skin Contact

The Nitocote NT402 MSDS is not a barrier to using a highly effective product; it is a roadmap for survival. Respect the solvent. Respect the flammability. Control the vapor.

Both components cause skin irritation (H315) and serious eye irritation (H319). The hardener can cause severe skin burns and permanent eye damage (H314). it is a roadmap for survival.

from the SDS.

Remove contaminated clothing and wash the skin thoroughly with soap and water. Do not use solvents for cleaning skin.

The exact percentages vary by batch and country regulations. Always refer to the specific MSDS provided with your shipment.

| Control | Specification | |---------|----------------| | | If ventilation inadequate: Half-mask with organic vapor cartridge (A-type). For spray application: Air-fed respirator. | | Hand protection | Nitrile rubber gloves (0.4mm thickness). Replace if contaminated. | | Eye protection | Chemical splash goggles (not just safety glasses). | | Skin/body | Chemical-resistant apron or coveralls, nitrile or butyl rubber boots. | | Engineering controls | Local exhaust ventilation (LEV) at mixing and application point. |