Sharp Atomic Clock Spc373 User Manual Now

When the alarm sounds, press the large SNOOZE/LIGHT button on top of the clock. The alarm will silence for 5 minutes before sounding again.

: Move the clock away from electronics like TVs or routers, which can cause interference. Incorrect Hour : Ensure you have selected the correct and that the (Daylight Saving Time) switch is set to "On".

To ensure proper signal synchronization, follow these steps exactly when first powering on your clock:

Do not press any buttons while the clock is searching for the signal initially, as this may interrupt the automatic setting process. 4. Atomic Time Synchronization (WWVB) The Sharp SPC373 sharp atomic clock spc373 user manual

A: The WWVB signal is only for North America (USA and parts of Canada). Outside this range, use manual mode.

Press and hold for 2 seconds to enter manual time setting mode.

High-contrast, bold numbers designed for easy readability, perfect for schools, offices, or large rooms. Second Hand: Included for precise viewing. By following these instructions, your Sharp SPC373 atomic clock will maintain accurate time for years to come. When the alarm sounds, press the large SNOOZE/LIGHT

Hold the button until the digits flash, then use the buttons to set your desired time.

If you live in an area with poor signal reception, you may need to set the clock manually: Press and hold the button for 3 seconds.

: Single press toggles between Alarm 1 and Alarm 2 modes. Holding for 2 seconds enters manual time setting mode. Incorrect Hour : Ensure you have selected the

The SPC373 has two independent alarms. This is useful for partners with different wake times or a weekday/weekend split.

For the clock to show the correct local time, it is crucial to set your time zone and DST preferences.

The Sharp SPC373 Atomic Clock Go to product viewer dialog for this item.