Life Probo Pr70 Instructions For Installation Use And Maintenance Manual 10 Pages Work

| Feature | PROBO PR70-07 / PR70-DL | PROBO PR120-07 / PR120-DL | | :--- | :--- | :--- | | | 230 Vac 50 Hz | 230 Vac 50 Hz | | Motor Power Supply | 24 Vdc | 24 Vdc | | Max. Power | 260 W | 310 W | | Max. Input | 8.5 A | 10 A | | Thrust | 650 N | 1100 N | | Speed | 0.10 - 0.18 m/s | 0.08 - 0.12 m/s | | Work Cycles | 50% | 50% | | Operating Temp. | -20°C to +70°C | -20°C to +70°C | | Protection Class | IP20 | IP20 | | Dimensions (h) | 442x213x142 mm | 442x213x142 mm | | Max. Door Width | Up to 5 meters | Up to 6.5 meters | | Control Unit | RG1 24P / RG1 24 DL | RG1 24P / RG1 24 DL |

:

at the rail head to secure internal chain.

to prevent vibration during high-torque operation. Section 5: Mounting the Drive System Header Bracket Installation Mark centerline of the garage door on the header wall. | Feature | PROBO PR70-07 / PR70-DL |

⚠️ Warning | 🔧 Maintenance | ⚡ Electrical hazard | 📖 See detailed section.

All external wiring, such as flashing lights or safety photocells, should follow the specific gauge requirements detailed in the electrical code. Section 8: System Configuration and Limit Settings Professional Calibration

: Fix the closing mechanical stop first, followed by the opening mechanical stop once the gate's stop point is identified. 2. Use and Manual Operations | -20°C to +70°C | -20°C to +70°C

SECTION 2: Essential Safety & Pre-Installation Verifications ⚠️ Mandated Safety Warnings

Replace the batteries in the remote control handsets if the operating range decreases.

For up-and-over doors, an is required.

This manual and the device it describes are strictly reserved for . Under applicable laws, the installation, wiring, initial commissioning, and any extraordinary maintenance of the PROBO PR70 must be performed exclusively by qualified technical personnel who possess specific knowledge of automated doors and their control systems.

| Parameter | Value | |-----------|-------| | Model | PR70 | | Power supply | 110–240V AC, 50/60 Hz | | Power consumption | 150W (max) | | Operating pressure | 0.5–6 bar (if applicable) | | Flow rate | [X] L/min | | Protection class | IP54 | | Dimensions (L×W×H) | 400×300×200 mm | | Weight | 7.5 kg |

. Below is a detailed summary of its installation, programming, and maintenance based on technical manuals. Automatizari pentru porti 1. Technical Specifications Power Supply: 230V AC (Mains) / 24V DC (Motor). 650 N for PR70-07 / PR70-DL. Max Leaf Surface: Up to 11.5 Operating Temp: Protection Class: 2. Installation Procedures Section 5: Mounting the Drive System Header Bracket