Never allow a user onto the lift until the following diagnostic checks are successfully completed:
: Bolt the seat tower onto the carriage. Check that the manual or automatic swivel mechanism locks securely into place at the top landing for safe transfers. 5. Wiring and Charging Stations
: To guarantee precise alignment and structural spacing.
Before clearing the lift for consumer use, complete a rigorous testing protocol. Initial Power-Up thyssenkrupp levant stair lift installation manual top
Drive the lift to the absolute top and bottom of the track. Ensure the electrical limit switches cut power before the unit hits the physical mechanical stops.
: Attach the seat mounting bracket, followed by the seat and footrest. Safety Wiring
Secure the armrests using the provided bolts and verify that the seatbelt retracts and buckles firmly. 7. Commissioning, Testing, and Safety Calibration Never allow a user onto the lift until
The Levant uses charging points at the top and bottom of the stairs. The transformer should be connected to the charging contacts closest to a power outlet (e.g., a 220V wall socket).
Measure the width of the stairs. The standard Levant requires a minimum staircase width of approximately 28 to 30 inches to allow the user's knees and feet to clear the opposite wall or banister comfortably.
The Levant operates on a battery-backed DC system that charges at the top and bottom of the stairs. Wiring and Charging Stations : To guarantee precise
: Charging "strips" or contacts are located at both the top and bottom of the rail. The lift must be parked on these contacts to keep the batteries charged. Remote Controls
What specific are you currently facing? Share public link