Use the form on the right to contact us.
You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right.
Yes. In Linux, the same ID is used to identify 8250/16550‑compatible serial ports. The Linux kernel includes a standard serial driver ( 8250 driver) that automatically handles PNP0500 devices enumerated by ACPI.
Right-click on or the entry showing a warning icon. Select Update driver . Click Search automatically for drivers .
Since the PNP0500 is part of the motherboard chipset, installing the latest chipset drivers from your manufacturer is the most effective solution.
Change the Basic configuration dropdown profile until the Conflicting device list panel shows "No conflicts." 2. Enable the COM Port in the System BIOS/UEFI
PNP0500 identifies a standard PC COM port, while PNP0501 is for a “16550A‑compatible COM port”. The difference is in the supported features (e.g., larger FIFO buffers). Many systems enumerate one or both, depending on the chipset emulation.
Legacy serial ports can be disabled at the firmware level. Restart your computer and press the BIOS key (usually F2 , F10 , or Del ). Navigate to > Onboard Devices Configuration or Super IO Configuration . Ensure the Serial Port or COM Port is set to Enabled and assigned an address (typically IRQ 4, IO 3F8). Uninstall and Re-Detect the Hardware
The driver is a legacy hardware identifier primarily associated with the standard communications port (COM port), specifically the 16450-compatible serial port.
Use the Intel Driver & Support Assistant to scan for chipset updates.
Even if your computer doesn't have a visible 9-pin serial port on the back, your motherboard might have an internal header for one, or your chipset might emulate one for system management. When the driver is outdated or missing, you’ll likely see a yellow exclamation mark in Device Manager labeled "Unknown Device." Why You Might Need a Driver Update
Yes. In Linux, the same ID is used to identify 8250/16550‑compatible serial ports. The Linux kernel includes a standard serial driver ( 8250 driver) that automatically handles PNP0500 devices enumerated by ACPI.
Right-click on or the entry showing a warning icon. Select Update driver . Click Search automatically for drivers .
Since the PNP0500 is part of the motherboard chipset, installing the latest chipset drivers from your manufacturer is the most effective solution. pnp0500 driver updated
Change the Basic configuration dropdown profile until the Conflicting device list panel shows "No conflicts." 2. Enable the COM Port in the System BIOS/UEFI
PNP0500 identifies a standard PC COM port, while PNP0501 is for a “16550A‑compatible COM port”. The difference is in the supported features (e.g., larger FIFO buffers). Many systems enumerate one or both, depending on the chipset emulation. Right-click on or the entry showing a warning icon
Legacy serial ports can be disabled at the firmware level. Restart your computer and press the BIOS key (usually F2 , F10 , or Del ). Navigate to > Onboard Devices Configuration or Super IO Configuration . Ensure the Serial Port or COM Port is set to Enabled and assigned an address (typically IRQ 4, IO 3F8). Uninstall and Re-Detect the Hardware
The driver is a legacy hardware identifier primarily associated with the standard communications port (COM port), specifically the 16450-compatible serial port. Since the PNP0500 is part of the motherboard
Use the Intel Driver & Support Assistant to scan for chipset updates.
Even if your computer doesn't have a visible 9-pin serial port on the back, your motherboard might have an internal header for one, or your chipset might emulate one for system management. When the driver is outdated or missing, you’ll likely see a yellow exclamation mark in Device Manager labeled "Unknown Device." Why You Might Need a Driver Update