the printer, but leave the power cable plugged into the wall and the USB cable plugged into the PC.
Keep holding the button, and release the Stop/Reset button.
Yes. Error 5B00 is Canon’s official code for “Waste ink absorber full.” The resetter clears error 5B00.
Press the button once to confirm. This action resets the waste ink counter. Turn the printer off and then back on to exit Service Mode. 3. Using Software Resetter (Service Tool) resetter canon e510
Canon printers are programmed with an internal counter (a page count) that estimates when this pad is full. Once the printer hits that limit (usually around several thousand pages), it triggers an error code (typically or P07 ) and locks the printer to prevent ink from overflowing onto your desk or damaging the electronics.
Before launching the software, you must put the printer into Service Mode: the printer (but keep it plugged into power).
Click the button located to the right of the Absorber drop-down menu. the printer, but leave the power cable plugged
The printer thinks the pad is full. Sometimes it is, but often the counter is simply paranoid. For most home users, the pad is saturated but not overflowing.
Press and hold the button (the triangle inside a circle icon).
The Canon Pixma E510 is a dependable, budget-friendly All-in-One printer favored by students and home offices for its high-yield ink cartridge system. However, like most Canon printers, it features built-in security and maintenance mechanisms designed to stop printing after a certain volume of work. Error 5B00 is Canon’s official code for “Waste
Note: If the orange light stays lit or flashes continuously, the printer did not enter Service Mode. Turn it off and try the sequence again, ensuring you press the reset button exactly 5 times. Step 2: Using the Canon Resetter Service Tool
The Canon Pixma E510 is a workhorse. Canon essentially creates an artificial expiration date via software. By resetting the counter, you can easily get another 12–18 months of life out of the printer.
Locate the downloaded executable file on your computer. Right-click the file and select "Run as Administrator" .
No – you download it. Use it? Yes – if your Canon E510 is blocked by a waste ink error and you’re okay with basic DIY.
Press the button to turn the printer back on normally.