Skope Heated Towel Rail Timer Instructions Jun 2026

Rails usually take 1.5 to 3 hours to fully dry a damp towel, so set your timer to start 2 hours before you shower.

While the exact process can vary slightly by model, the general method for setting the timer is straightforward.

: These units are designed strictly for warming towels and bathrobes; do not use them for other drying purposes. skope heated towel rail timer instructions

Perform a hard reset. Use a paperclip to press the recessed RESET pinhole button on the front panel face, then reprogram the date and time from scratch. 7. Safety Warnings and Maintenance

Check the main power switch at the base of the rail or your home's circuit breaker. If it’s a plug-in model, ensure the outlet is live. Rails usually take 1

For a quick burst of heat without changing your schedule, use the button:

Check your home's main switchboard RCD switch. If the mains power is functional, leave the unit powered on for an hour to see if the internal battery recharges. Towel Rail is Cold But Timer Says "ON" Perform a hard reset

: To have the rail on from 7:00 AM to 9:00 AM (2 hours), you would push out the 8 black segments covering that 120-minute period.

Press and hold the SET or CLOCK button for 3 seconds until the digital display digits begin flashing.

Turn off or completely isolate the power supply to the towel rail at the main wall switch.