Slide the optical drive outward through the side slot of the PC frame.
Lay the PC face-down on a soft, clean surface like a microfiber towel or foam pad to protect the screen screen from scratches. Step 1: Removing the Stand
The heavy metal stand secures the unit to your desk and anchors the back cover.
The Acer Aspire ZC-610 is a compact All-in-One (AIO) desktop PC. Upgrading its hardware or replacing the thermal paste requires a systematic teardown. Because AIO computers pack all components tightly behind the screen, following a precise order prevents damage to the fragile LCD panel and plastic clips. acer aspire zc610 disassembly full
Carefully lift the fan out to clean it or apply new thermal paste to the CPU. Ensure all ribbon cables are seated correctly and locked. Reinstall the metal shielding.
The Acer Aspire ZC610 officially supports up to a maximum of 16GB of RAM, using DDR3L-1600 memory modules.
Remove all visible screws on the back cover. Check the bottom edge, the areas near the ports, and inside the recess where the stand was attached. Slide the optical drive outward through the side
The exterior stand provides structural support but blocks access to the primary rear chassis screws.
Gently pop the clips by twisting the pry tool, moving slowly along the bottom edge, up the sides, and across the top.
Generally located on the side, held by a metal bracket. The Acer Aspire ZC-610 is a compact All-in-One
Remove the screws holding the metal frame of the screen to the front bezel.
Reassembly is the reverse of the disassembly process. Be methodical.
To put your Acer Aspire ZC-610 back together, follow these steps in exact reverse order. Keep these pointers in mind:
Unlike standard desktop towers, AIO computers use a combination of hidden screws and tight plastic clips to hold the shell together.