The user manual for the Viva Water Dispenser model 8LIECH-SC-SSD is far more than a perfunctory leaflet; it is an essential component of the appliance's ecosystem. Through its structured approach to safety, installation, operation, and troubleshooting, it ensures that the complex engineering inside the dispenser translates into a simple, safe, and reliable user experience. While the hardware provides the water, the manual provides the knowledge necessary to use it correctly. In a world increasingly reliant on complex appliances, the 8LIECH-SC-SSD manual stands as a testament to the importance of clear communication in consumer technology.
The Electrotemp Technologies (and all 8LIECH‑series dispensers) is covered by a 1‑year limited warranty for the original purchaser. The warranty covers all parts that fail due to defects in materials or workmanship when the dispenser is used and maintained according to the printed instructions.
| Task | Frequency | |------|------------| | | Weekly | | Wipe exterior with damp cloth | As needed | | Clean back coils (dust) | Every 2‑3 months | | Full reservoir & line cleaning | Every 3 months, or whenever water tastes stale | | Inspect power cord & plug | Every 6 months | | Check drain cap seal | Annually |
The Viva typically includes a 1-year limited warranty on parts and compressor, and a 90-day warranty on labor. viva water dispenser manual 8liech-sc-ssd
: 80°C – 92°C (176°F – 197.6°F) Hot Capacity : 6 Liters per hour
Leave at least at the back and on both sides. This allows proper airflow across the condenser.
This manual outlines the setup, daily operation, deep cleaning procedures, and troubleshooting steps needed to keep your unit operating efficiently. 📋 Viva 8LIECH-SC-SSD Product Specifications The user manual for the Viva Water Dispenser
The water bottle is placed upside down into the receptacle on the top of the unit. The related 8LIECH‑SC‑SSFP5W is a bottom‑loading version, but your SSD is a top‑loader.
The is a highly advanced appliance engineered by Electrotemp Technologies . It provides instant steaming hot and freezing cold water through automated sanitation. This comprehensive user manual and operational guide details safety setup, bottle installation, routine care, and troubleshooting for your unit. Technical Specifications Power Supply : AC 120V / 60Hz / 6.5 Amp
One of the standout features of this model is the Oxygenated Ozone (O3) self-cleaning technology. In a world increasingly reliant on complex appliances,
: Install exclusively indoors. Protect the machine from direct sunlight, freezing temperatures, and moisture. Never place the unit inside a closed cabinet.
| Control / Indicator | Function | |---------------------|----------| | (on back) | Main power ON/OFF | | Hot Water Tap (usually red lever) | Dispenses hot water | | Cold Water Tap (usually blue lever) | Dispenses cold water | | LED Night Light | Provides soft illumination; also flashes when the bottle is empty (intermittent beep accompanies the flashes) | | Self Clean Indicator (LED display) | Shows when the ozone self‑clean cycle is running (SSD model) | | Cold / Hot Ready Indicators (LEDs) | Light up when the water has reached the desired temperature |
To dispense, push the red safety lock button inwards, then press the hot water button down. Cold Water: Press the blue button. Room Temperature: Press the green/neutral button.