Satlink Ws6933 Software Update Portable __top__ Jun 2026
| Feature | Specification | |---|---| | | 2.1" TFT Positive Transflective LCD (240x320 pixels) | | Frequency Range | 950 ~ 2150 MHz | | Input Level | -65 ~ -25 dBm | | LNB Supply | 13V/18V, up to 300mA | | Battery | 7.4V / 800mAh Li-Ion | | Portability | Dimensions: 8x16x4 cm, Weight: 0.25kg | | Update Method | USB Port (USB to RS-232) |
First, identify the current software version on your device. This can usually be found in the "System Setup" or "Information" menu. Write this version number down. Common versions seen in online discussions include v4.6 , v4.3C , v5.2 , and v5.6 . Knowing your starting point is crucial.
Look for a new COM Port entry (e.g., Prolific USB-to-Serial or CH340 ). Note the assigned . 3. Flash the Firmware
: Click "Open" or "Load" within the tool to select your new software file. : Click "Start" or "Upgrade."
The Satlink WS-6933 Go to product viewer dialog for this item. satlink ws6933 software update portable
A progress bar will appear on your computer screen, and the meter's display may flash or show a downloading status. The process typically takes between 1 to 3 minutes. Step 6: Reboot and Verify
: Given the age of the WS6933, official support may be limited, but the following sources remain reliable:
Turn off your Satlink WS-6933 using the physical power switch.
Access a digital version of the product manual and basic specifications on Manuals.plus | Feature | Specification | |---|---| | | 2
The device excels at its core function: measuring signal strength and quality. When you connect it to your satellite dish, it will display these parameters on its 2.1-inch LCD screen, guiding you to the optimal position. It features a sound and light alarm to lock onto a signal, and even includes practical extras like a built-in compass and an LED flashlight for those nighttime installations.
This is often the most challenging part. Satlink, as a brand, does not maintain a centralized, public-facing database of firmware for every device model. Therefore, you need to rely on the following sources:
Verify that the software version number matches the file you just installed.
To update the software or satellite database, you typically need a PC and the specialized "Satlink Tool" software. Preparation Common versions seen in online discussions include v4
If you encounter any issues during the software update process, here are some common troubleshooting steps:
. While there is no single official global "portal" for downloads, updates are typically provided by regional manufacturers or through dedicated satellite tool software. Preparation & Requirements
: With a steady hand, he opened the upgrade tool. He selected the new
For managing satellite names and transponder lists. Flashloader: For flashing the actual device firmware.
: Once complete, restart the WS-6933 normally. Navigate to System Setup in the menu; the first line will display the current SW Ver (Software Version) to confirm the update was successful. Where to Find Software
Finding official firmware updates for the WS6933 can be challenging.