Release the Power button. Wait for the green light to stop blinking and stay steady. Once in Service Mode, press the Stop button 5 times . Press the Power button once to confirm the command.
When this counter reaches its maximum limit, the printer locks down, displaying the dreaded or causing the orange alarm lamp to blink 7 times. This signifies that the waste ink absorber pad is theoretically full.
Connect the printer to your PC via (Wi-Fi won't work in Service Mode). Open the Service Tool software. resetter printer canon g2010
Press the again to turn the printer back on normally.
Before opening any resetter software, you must manually boot your printer into . The resetter software cannot communicate with the printer under normal operating conditions. Follow these exact button presses to enter Service Mode: Release the Power button
While holding the Stop button, press and hold down the button.
If the pad is saturated:
Which your computer uses (Windows 10, 11, etc.)?
While holding the Stop button, press and hold the button. (The power LED will light up green). Press the Power button once to confirm the command
Resetting your Canon G2010 is a software solution to a hardware problem. While this guide fixes the digital counter and gets you printing again, please remember that the physical waste ink pads are still full.