Pleco Software

Latest News

  • Chinese History: A New Manual, Seventh Edition

    We’re proud to announce the release of the new Seventh Edition of Endymion Wilkinson’s Chinese History: A New Manual, published exclusively as an electronic edition by Pleco. In addition to being available in our iOS and Android apps – with a 50% discount for people who purchased the previous edition through us – it’s also …Read More »

Sc569-00 Ricoh !!exclusive!!

: In many cases, the code must be manually cleared using the Service Program (SP) mode: Service Mode (usually by pressing Reset/Clear Clear/Stop held for several seconds). Navigate to (SC Reset) and execute it. Restart the machine using the main power switch. Draft Social Media/Blog Post

When a Ricoh machine warms up to roughly 150°C, it activates the pressure release motor to test the fusing belt or roller tension. If this mechanical loop fails, the system triggers the SC569-00 code. The issue typically stems from four specific sources:

. It occurs when the motor responsible for adjusting the fuser rollers fails to reach its home position or encounters a sensor mismatch. Troubleshooting and Fixes sc569-00 ricoh

A: In some cases, entering or waking from an energy-saving state can trigger the error if the machine cannot correctly read the motor's position or if there is a minor glitch in the capacitor control board. As a test, you can try disabling energy-saving modes. If the error stops, it may point to a deeper software or hardware issue.

The pressure release motor or its home position sensor may be defective or disconnected. : In many cases, the code must be

: Loose paper scraps or toner buildup can prevent the gears from turning.

To understand this error, you need to know a bit about your printer's fusing process. The fuser unit uses intense heat and pressure to fuse toner onto the paper. Between print jobs, a motor-driven mechanism releases this pressure to prevent damage to the fuser components, particularly the fuser sleeve, and to make it easier to clear paper jams. Draft Social Media/Blog Post When a Ricoh machine

If your Ricoh printer or MFP has suddenly stopped working and displayed the code (sometimes listed simply as SC569), you are likely facing a "Depressurizing Error" within the fusing unit. This error prevents the machine from operating to protect the fuser assembly from damage.

Many Ricoh fusers use a thin metal sleeve (the hot roller). Over time, the edges of this sleeve can warp, curl, or develop burrs. This physical deformation presses irregularly against the thermistor, causing erratic temperature readings at the roller’s edge.

If you are writing a post for your team or a tech blog, here is a template you can use: 🔧 Tech Tip: Resolving Ricoh Error SC569-00 Stuck with an code on your Ricoh copier? This is a Fusing Pressure Release Motor Error

According to Ricoh service documentation , the .