Arduino Sensor Shield V5 0 Manual 95%

Ensure the dark wire (brown/black) aligns with , the red wire aligns with V , and the orange wire aligns with S .

Connected directly to the corresponding Arduino I/O pin. 1. Digital and Analog I/O Blocks

The Sensor Shield allows two methods of powering your sensors: arduino sensor shield v5 0 manual

Additional serial interface for universal UART communications. 2. Power Management and External Supplies

Remove the SEL jumper if you are connecting power-hungry devices like multiple RC servo motors. Connect an external 5V to 6V power supply to the blue screw terminal block. Ensure the dark wire (brown/black) aligns with ,

Setting this wrong will burn 3.3V sensors. The shield defaults to 5V from the factory.

A multi-pin breakout block tailored for standard SPI-based SD card reader modules. Digital and Analog I/O Blocks The Sensor Shield

Ideal for Bluetooth modules or serial communication. SD Card Interface: For data logging modules.

The Arduino Sensor Shield V5.0 Go to product viewer dialog for this item.

Locate any two adjacent digital I/O rows on the shield (e.g., and D12 ). Connect the sensor's VCC to the V pin on row 11. Connect the sensor's GND to the G pin on row 11. Connect the sensor's Trig pin to the S pin on row 11. Connect the sensor's Echo pin to the S pin on row 12. Example 2: Connecting an I2C 16x2 LCD Screen