While keypad programming works for adding a single repeater on the fly, software configuration offers significant advantages:
Mastering Your Icom IC-2200H: A Complete Guide to CS-2200 Programming Software
Before opening the software, connect your OPC-478UC cable to the computer, install the necessary USB drivers, and note the assigned COM port number in your Windows Device Manager. Step 1: Connect the Radio Turn off the Icom IC-2200H. CS-2200 Icom IC-2200H Programming Software
: RT Systems version, known for an easier interface and CHIRP (free/open-source alternative). Programming Cable : Must be a 3.5mm (1/8") TRS plug. Standard cables like the USB Programming Cable for Icom are widely available from eBay or Amazon. PC Requirements
: Assigns alphanumeric labels to raw frequencies. This lets you view alpha tags (like "LOCAL RPT" or "EMER 01") directly on the front panel display of your IC-2200H. While keypad programming works for adding a single
: Easily program and organize the radio's 207 alphanumeric memory channels, including 6 scan edges and 1 call channel. Bank Organization
Regardless of the software you choose, the basic process is similar. Here is a general workflow: Programming Cable : Must be a 3
: Connect your USB programming cable and ensure the correct drivers (e.g., for Icom OPC-478UD ) are installed.
: You can label channels with up to 6 alphanumeric characters and organize them into 10 banks (A to J) for different regions or groups. External Data Links : Some versions, such as RT Systems' WCS-2200
Use the spreadsheet view to input your desired frequencies, duplex offsets (+/-), tone frequencies (CTCSS), and memory names.
The official Icom USB-to-3.5mm stereo jack cable.