Instal Xprinter Xp-d4601b [patched] 【95% Updated】

Pull the first label slightly out past the rubber roller at the front.

Clean the thermal print head with an isopropyl alcohol swab. Alternatively, open Printing Preferences -> Options and increase the Darkness setting.

: Flip the power switch to the ON position. The dual-color LED indicator light should turn a steady blue or green, indicating that the system is ready. Run Smart Calibration : Turn the printer off.

Position the XP-D4601B on a flat, stable surface near your computer and a power outlet. instal xprinter xp-d4601b

To communicate with your computer, the XP-D4601B requires specific Windows or Mac drivers.

(Note: For advanced barcode printing and robust layout formatting, professional label software like BarTender Software supports Xprinter drivers natively to process high-resolution layouts). Step 5: Best Practices for Troubleshooting

This occurs when labels are loaded upside down. Ensure the thermal-sensitive layer is facing upward toward the print head. Pull the first label slightly out past the

The process for macOS is slightly different and involves granting specific security permissions.

Select Xprinter XP-D4601B from the list of models. If it is not listed, select the generic 4-inch thermal printer model recommended in your user manual.

Plug the square end of the USB cable into the printer’s USB port and the flat end into an available USB port on your PC or laptop. Load the Media (Labels): : Flip the power switch to the ON position

Insert the adjustable paper roll holder spindle through the center core of your thermal label roll.

| Error | Solution | | :--- | :--- | | | Try a different USB port. Avoid USB 3.0 (blue ports) – use USB 2.0 (black). Replace the cable. | | Printer shows “Offline” | Go to Printers & scanners > XP-D4601B > See what’s printing > Printer menu > Uncheck “Use Printer Offline”. | | Labels print blank | You are using non-thermal paper. Turn the paper over – the coated side must face the thermal print head. | | Garbage text / symbols printing | You selected the wrong driver (e.g., ZPL instead of TSPL). Reinstall using the correct .inf file. | | Ethernet IP keeps changing | Assign a static IP via your router’s DHCP reservation or configure it on the printer’s web interface (if available). |