Based on technical forums and repair databases, this firmware (or very close variants) is used on televisions from the following manufacturers:
This is very likely part of a firmware update package for an ONVO car’s infotainment screen (1920x1080 resolution, 1GB RAM/8GB storage model), using a TP.SK513S.PB802 hardware platform.
. You must download all parts (part1, part2, part3, etc.) and extract them together into a single file before placing it on a FAT32-formatted USB drive. Compatibility: TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar
This file is a of the USB-upgradable firmware for an ONVO Smart TV using the TP.SK513S.PB802 motherboard. This specific firmware is configured for a Full HD (1920x1080) resolution display with 1GB of RAM and 8GB of internal storage. Technical Specifications
While holding the button, plug the TV power cord back into the wall. Based on technical forums and repair databases, this
This underlying configuration dictates the exact panel timing, Low-Voltage Differential Signaling (LVDS) mapping data, and power regulation constants embedded inside the firmware file. Flashing software compiled for alternative hardware sizes (such as a 1366x768 display) onto this physical board configuration can physically distort the raster or clip the display signal. Deconstructing the Archive String TP.SK513S.PB802 1920x1080-1G-8G-ONVO-USB.part3.rar Use code with caution.
button on the TV and plug in the power cord. The TV should enter an update mode (often indicated by a blinking LED). Compatibility: This file is a of the USB-upgradable
: Since this is "part3," you must download all other parts (part1, part2, etc.) into the same folder before you can successfully extract the final .bin file using a tool like WinRAR or 7-Zip. Board Match : Ensure your physical board matches the TP.SK513S.PB802
This is one of the most common issues. A "corrupt archive" error usually does not mean the file is actually broken.
What is the printed on the internal sticker of your display matrix?