Hofmann Duolift Gte 2500 Manual

| Parameter | Value | |-----------|-------| | Lifting capacity per column | 2,500 kg | | Overall lifting capacity (4 columns) | 10,000 kg | | Minimum lifting height (pads retracted) | 110 mm | | Maximum lifting height | 1,850 mm | | Lifting time (0 to max height) | Approx. 35 seconds | | Lowering time | Approx. 30 seconds | | Motor rating per column | 1.5 kW (electro-hydraulic) | | Power supply | 230V / 50-60 Hz (single phase per column) | | Protection class | IP 54 (control unit) | | Synchronization | Wireless RF or shielded cable (fail-safe) |

Use heavy-duty mechanical or chemical anchors recommended by the manufacturer. Tighten all anchor bolts with a calibrated torque wrench to the exact foot-pounds or Newton-meters specified in the technical data sheet. Check these torques again after the first week of heavy operation. Electrical Connection

The Hofmann Duolift GTE 2500 is a two-post lift designed for lifting a wide range of vehicles, from small cars to larger trucks and SUVs. With a maximum lifting capacity of 2500 kg (5500 lbs), this lift is perfect for busy garages and workshops.

Pull the safety release lever or hold the electronic lock release. hofmann duolift gte 2500 manual

Plug each column into a separate, dedicated outlet (same phase sequence). Press the green “power on” button. The red emergency stop must be twisted clockwise to reset.

The Ultimate Guide to the Hofmann Duolift GTE 2500 Manual The is a benchmark electromechanical two-post automotive lift. It is engineered primarily for professional workshops and tire service centers. This asymmetric, base-frame vehicle lift delivers a 2500 kg (2.5-ton) lifting capacity . It is highly valued for its robust engineering, specialized Nylatron lift nuts, and roller-hardened spindles.

The mechanical engineering behind the GTE 2500 targets maximum structural stability in small to mid-sized commercial garages and tire centers. It operates utilizing a heavy-duty master motor driving the secondary column through a robust roller chain nested completely inside the slim base frame. Specification Attribute Factory Value / Measurement 2,500 kg (approx. 5,500 lbs) Drive System | Parameter | Value | |-----------|-------| | Lifting

The GTE 2500 is not a simple car jack; it is a hydromechanical lifting device with specific operational sequences. The manual is your legal and technical roadmap. Here is why you should never operate this machine without referencing its manual:

I searched for the specific article or manual for the (a two-post car lift), but I cannot directly provide the PDF file. However, here is what you need to know:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Tighten all anchor bolts with a calibrated torque

The manual is generally structured into four key sections:

Clear the bay. Ensure the lift arms are in the drive-through position to avoid damaging the vehicle or lift.

Utilises wear-proof, roll-hardened spindles driven by a powerful 3 kW electric motor Lifting Time: Approximately 45 seconds to reach full height. Electrical Needs: Standard operation requires a 3/PE AC 50 Hz 380–415 V power supply. Autosfera.lt 2. Foundation & Installation Requirements

By providing a comprehensive guide to the Hofmann Duolift GTE 2500 manual, we hope to have helped you understand the features, specifications, and operation of this versatile vehicle lift. Happy lifting!

A built-in chain fracture switch provides an immediate halt in case of mechanical failure. Lubrication: