Digi Sm500 Scale User Manual ❲2027❳

Turn off the power. Open the printer mechanism. Moisten a microfiber cloth or cotton swab with 90%+ isopropyl alcohol. Gently wipe the thin black line on the thermal print head to remove adhesive buildup and carbon dust. Allow it to air dry for two minutes before loading paper.

Place the food item inside the empty container on the scale. Enter the item PLU code and press . Press [PRINT] to issue a label showing net weight only. 6. Troubleshooting and Error Codes

Supports Ethernet (TCP/IP) and wireless connectivity for back-office data management.

DIGI SM-500 Scale User Manual: A Complete Setup & Programming Guide The DIGI SM-500

Place the product into the container. The scale will display only the net weight of the merchandise. digi sm500 scale user manual

Useful for counting screws, beads, pills.

Place the empty container on the platter. Press the [TARE] key. The display will reset to zero, and the Tare indicator will light up.

Place the scale on a flat, stable, and vibration-free surface.

Re-level the scale, remove debris under the platter, and ensure no objects are touching the sides. Turn off the power

The scale will display CAL END . Remove the weights and restart the scale. 7. Troubleshooting and Error Codes Error Code / Symptom Root Cause Corrective Action or UF Overflow / Underflow error.

: Numeric keypad used for entering PLU numbers, prices, and quantities. [PLU] : Calls up programmed item data from the memory.

The DIGI SM-500 is a powerful tool when properly understood. By following this guide and referring to the official documentation, you can ensure accurate, efficient operations. Always ensure that staff are trained on the basics of , PLU entry , and label roll replacement to minimize downtime. Need Help? If you need specific help with: Finding a local technician for the DIGI SM-500 ? A download link for the full PDF manual? Programming instructions for a specific software version?

. It was a sleek, stainless steel marvel of retail engineering, but to Marco, it was a riddle wrapped in a technical manual . Gently wipe the thin black line on the

Ethernet (TCP/IP), RS-232C, and USB for back-office data synchronization. 2. Hardware Setup and Installation

Enter the item name using the alphanumeric keypad. Press when complete.

: Regular maintenance requires cleaning the thermal print head with specialized cleaning pens or soft cloths to prevent streaking or unreadable barcodes.

To clear the tare weight, remove everything from the platter and press again. 5. Programming and Data Entry