The adjustment program only resets the software counter . It does not physically clean or empty the ink pads. Running the printer repeatedly after a software reset without addressing the physical ink accumulation can result in ink leaking out of the bottom of the printer, causing permanent damage to the machine or your furniture. Prerequisites A computer running Windows OS (Windows 7, 8, 10, or 11).

A high-quality USB cable connecting the printer directly to the PC (Do not use Wi-Fi or a USB hub).

The program allows users to test individual internal parts, including the paper feed rollers, the scanner carriage motor, and various sensor voltages, to diagnose mechanical failures. Step-by-Step Guide to Resetting the Waste Ink Pad Counter

Fifteen minutes later, the

Never use a network connection to run adjustment programs.

When this counter reaches 100% capacity, the printer goes into a safety lock mode to prevent ink from overflowing onto your desk or damaging the internal circuitry. You will typically see the following indicators:

Safe, official digital signatures, highly user-friendly interface.

If the counter reads 100%, check the box once more.

Press the physical power button on your M2110 printer to turn it off. Click on the computer screen.

While often mentioned together, the M2110 Adjustment Program is often the same software tool designed for the entire M21xx series. You may find that one tool, such as "Resetter Epson M2120 Adjustment Program version 0.1 Build 7220", works perfectly for the M2110 as well.