Take your original working key card (if available) and insert it into the card slot. Click or Learn Key .
Before you begin programming, you need to gather the correct tools. Using incompatible hardware can lead to communication errors or even corrupt your vehicle's UCH module. 1. The Renolink Software renolink key card programming
Insert the second card (or your new blank card) when prompted, and repeat the process. Take your original working key card (if available)
: He opens the Renolink software, navigating the technical menus to find the "Key Programming" section. This isn't just about unlocking doors; it’s about syncing the immobilizer chip so the car recognizes the card as "authorized". Using incompatible hardware can lead to communication errors
Turn the vehicle's ignition to the position using an existing, working key card (if available). If all cards are lost, press the Start button without pressing the pedals to activate terminal 15/dash power. Launch the Renolink software on your PC. Step 2: Establish Communication
This procedure assumes you have a working key that starts the car. If you have lost all keys, you will need an immobilizer bypass or a professional tool like Abrites or Autel. Renolink generally requires at least one working master key to authenticate security access.
Disclaimer: Key programming modifies the vehicle's immobilizer system. Follow these steps carefully. Ensure your laptop battery is fully charged and your vehicle's battery voltage is stable (above 12V) before starting. Step 1: Connect the Hardware