Acer G41m07 Motherboard Manual Jun 2026

The board supports Intel processors with a maximum TDP of and Front Side Bus (FSB) speeds of 800/1066/1333 MHz. Supported families include: Intel Core 2 Quad and Core 2 Duo. Pentium Dual-Core and Celeron Dual-Core. Older Celeron 4xx series. Connectivity & Internal Headers

No. The Acer BIOS locks all FSB, voltage, and multiplier options. You cannot overclock. The only "performance" setting is Memory Frequency (Auto or 800 MHz only).

, often produced by ECS (Elitegroup Computer Systems) for Acer, provides a foundation for LGA 775 processors. Intel G41 Express Chipset with ICH7 Southbridge.

Pin 1 (VCC/5V), Pin 3 (Data-), Pin 5 (Data+), Pin 7 (GND). acer g41m07 motherboard manual

Often caused by incompatible RAM or a weak CMOS battery (CR2032).

2x DDR3 DIMM slots (typically supports up to 4GB or 8GB depending on specific BIOS revisions).

The BIOS setup section explains how to configure the motherboard's BIOS settings, including: The board supports Intel processors with a maximum

Locate the three-pin jumper labeled (usually near the round CR2032 watch battery).

What are you using (e.g., Windows 7, Windows 10)? Share public link

If your system fails to boot after a hardware change or an incorrect BIOS modification, resetting the CMOS memory will restore factory defaults. Older Celeron 4xx series

Uses standard 24-pin and 4-pin power connectors, making it compatible with modern power supplies.

If the board won't POST or you're locked out of settings, you can perform a manual CMOS reset Acer G41M07 - The Retro Web