3.1 Last Updated: [Current Year] Compatibility: All V2000-c hardware revisions H1.2 and above.
| Mode | Code | Behavior | Best Use | | :--- | :--- | :--- | :--- | | | 19 0 # | Swipe or PIN keypad. Relay activates. | Standard office, no high security. | | Card + PIN | 19 1 # | User must swipe AND enter PIN. | High-security server rooms, labs. | | Card or PIN | 19 2 # | Either a valid card OR a valid PIN works. | Convenience stores, gyms. |
| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | No LED / No beep | Power failure | Check 12V supply polarity. | | Card not working | Wrong frequency / Not added | Ensure card is 125KHz or 13.56MHz. | | Door won’t lock | Wiring to NC/COM reversed | Swap Green (NC) and White (COM) wires. | | Alarm always beeps | Door sensor open | Disable sensor (Command 22 0 #). |
The V2000-c provides a practical, cost-effective entry solution for many installations. With correct installation, strict admin practices, and routine maintenance, it will deliver reliable daily operation and straightforward auditing. Balance convenience and security by using encrypted channels and two-factor methods where possible, and always comply with local egress and fire safety regulations. V2000-c Rfid Access Control User Manual
Caution: This action deletes all saved user cards and PIN data permanently. 5. Advanced Settings and Security Features Tamper Alarm Function
: Relay Normally Open (NO) – Connects to Fail-Secure locks (Dropbolts/Strikes)
All commands must be entered via the keypad, followed by the # key unless noted. | Standard office, no high security
The is a standalone RFID access control keypad designed for single-door security. It supports up to 1,000 users and utilizes 125KHz EM standard cards. 1. Core Specifications Operating Voltage: 12VDC ± 10%. Unlock Relay: 12VDC / 2A. Card Type: 125KHz EM standard RFID cards. User Capacity: Up to 1,000 users. Entry Modes: Card only, PIN only, or Card + PIN. 2. Setup and Programming
Connect to positive lock terminal for Fail-Safe locks (Maglocks) COM (Common)
The 3 key is used to delete individual users. | | Card or PIN | 19 2
Normally Open relay contact (used for fail-secure electric locks) COM (Grey): Common relay contact
The V2000-C RFID access control system is a reliable and effective solution for securing access to a premises or specific area. By following the user manual and configuration guide, administrators can ensure optimal performance and security. Regular maintenance and troubleshooting can help prevent system downtime and ensure smooth operation.
The V2000-C system is designed to be reliable and durable, but like any system, it may require occasional troubleshooting and maintenance. The user manual provides a comprehensive guide on how to troubleshoot common issues and perform routine maintenance tasks.
Since "V2000-C" is a popular model produced by various access control manufacturers (most notably by or as a generic OEM model sold under brands like Generic/Vision), the exact manual layout can vary slightly. However, the functionality is almost identical across these devices.